2013年夏天，选择ChemTrend收购其竞争对手Zyvax Inc.，以增强协同效应，并提高其在风能，航空和航空航天认证的Waterbased发布产品中的地位。 在此关系中，ChemTrend决定继续与Granudan合作，成为风能和复合材料行业的独家代表，用于两种Zyvax和Chemlease产品。 我们很高兴将ChemTrend的发布计划纳入我们的丹麦和国外客户的“技术解决方案包”中。
底漆 MPP 712 EZ
Chemlease MPP 712EZ
这是一款性能卓越的产品。 Chemlease ® MPP 712 EZ 是专为FRP与高级复合材料行业is formulated for sealing tooling in both the FRP and advanced composites sectors
Sealing of big porosities; . Ideal for mold-build (e.g. purfoam) or refurbishment of old, worned mold surfaces. High viscosity – can bond to almost every surface (plywood, pur, metal, steel.) Surface needs to be 100% clean. (wipe-on leave on). (onetime use – very durable and consistent) – creates a Styrene-barrier.S elf-leveling during application.
THIS PRODUCT HAS NO RELEASE-PROPERTIES – SEALER STILL NEEDS TO BE USED AFTERWARDS!
Chemlease 5142W Cleaner
Chemlease ® 5142W Mold Cleaner is a water-based, environmentally friendly cleaner for the treatment of mold build-up. It effectively removes sealers, primers and topcoats from most tooling including aluminum, epoxy, steel, polyester and vinyl ester substrates.However due to aggressive attack the mold has to be checked for resistance once before the cleaner should be used.
Mould cleaner EZ
Chemlease Mouldcleaner EZ
Chemlease ® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds. Ideal for preparing composite mold surfaces for the application of Chemlease ® Mold Sealers and Releases. Also excellent for cleaning brushes and equipment
Chemlease Sealer 15EZ
Chemlease 15 Sealer EZ is a high performance sealer developed to condition and seal mold surfaces, reduce mold porosity and act as a base for new or reconditioned molds.
Benefits: HAPs Free* / Reduces porosity problems / Provides an excellent base coat for all types of release agents. / Compatible with fiberglass, aluminum, steel, and most solid or dense surfaces / Shortens break-in time. / Reduces labor time and costs.
High temperature stability
封孔剂 122 – 哑光封孔剂
Chemlease Sealer 122 – 哑光封孔剂
Matte sealer, sprayed up. No release properties, but changes the conture of the surface to matte appearance. Apply 1x Sealer GP/Sealer EZ after curing
高光, 中-高度光滑 – 适用于聚合物 （polyester）
is a unique semi permanent mold release system developed specifically for the composites industry, for use where a high quality finish is required.
Benefits: HAPs free* / Multiple releases between application / Easy to apply / Eliminates the use of wax / Reduces labor time and costs / Provides excellent gloss / High temperature stability / Does not build up on the mold surface / Minimal transfer to molded part.
高光, 中-高度光滑 – 适用于Epoxy（环氧树脂） /橡胶/PUR（聚氨酯）
Chemlease ® 255 is a solvent based, semi-permanent, abrasion resistant release product, which provides excellent high-slip properties, minimal transfer and hightemperature
stability. The Chemlease ® 255 coating, applied according to instructions, adheres to the mould surface and provides multiple release properties for various plastic and rubber moulding applications, except for silicone rubber. The film coating is micro-thin which gives excellent mould reproduction and minimizes mould fouling / build-up. The Chemlease ® 255 formulation contains no Ozone Depleting Substances (ODS).
high gloss, medio/low slip – for polyester; no sealer
Solventbased Semi-Permanent – but contains 1-2% wax – For all mould types and to be used without sealer. Small parts, low-temp. Does not require an extended cure. Increases gloss. Wax is removed during wiping off limiting build-up. It´s a L-products with strong solvent. Effective for
composites including polyester molding. It is a ready-to-use liquid dispersion.
Especially industries like rubber, tires and die casting are large consumers of ChemTrend’s specialized release products. Thus continuously developing new products from ChemTrend’s three advanced laboratories, respectively for “Composite”, “Rubber & Tire” and “Die Casting” located in the headquarters in Howell, Michigan.