Knud Bro Allé 4
+45 44 84 37 56

Step 3: Release agents

WATER

SOLVENT

Breez® WaterShield

Breez® WaterShield

High release power. For productions with epoxy and no gelcoats. Comparable with Multi shield! No build-up. Multiple releases. Curing time 30 min. Temperature and humidity can improve curing-cycles. Thermal stability up to 260 °C.

Approx. 130-150 sqm./liter.

4 liter & 19 lit. pail w. tap

Breez® Enviroshield

Breez® Enviroshield

Medio high release power. For productions with epoxy and use of gelcoats. No build-up. Multiple releases.

Curing time 30 min. Temperature and humidity can improve curing-cycles. Thermal stability up to 260 °C.

Approx. 130-150 sqm./liter.

4 liter & 19 pail w. tap

Breez® Silvershield 320

Breez® Silvershield 320

Low release power. To improve adhesion for sealant tape - simply apply on top of e.g. enviroshield - no wiping-off. Release effect like Composite shield! Curing time 15 min. No wiping off. To be applied after EVERY production on e.g. flanges and edges! Thermal stability up to 260 °C.

Approx. 120 sqm./liter.

2 liter & 4 liter

Breez® Nano Release

Breez® Nano Release

Medio release power. Unique polymer based on same chemical backbone as Sealer BN201. Very suitable for PU gelcoats, and in general prevents from running and fisheying. Suitable for both polyester and epoxy production.

NANO RELEASE leaves a more "dry" surface than known from WaterShield and Enviroshield, but with same quick methods for application.

4 liter (16 liter/box)

Breez® Composite Shield

Breez® Composite Shield

For parts with easy slip. Prevents pre-release. Medio release effect! No build-up. High number of releases. Curing time 30 min. Thermal stability up to 480 °C

Approx. 130 sqm./liter.

3,75 liter (15 L/box)

Breez® Multi Shield

Breez® Multi Shield

Very high slip. Suitable for polyurethane. Comparable with WaterShield. No buildup. High number of releases. Curing time 30 min. Thermal stability up to 480 °C.

Approx. 130 sqm./liter

3,75 liter (15 L/box

Granudan Aqua Slipcoat 506

Granudan Aqua Slipcoat 506

Combination of polymer and liquid wax. Highly flexible, easy-to-use waterbased release coat. Can withstand a high stress on mould surface, and suitable on moulds with a poor surface quality. Multiple releases (but less than a 100% polymer), cost-effecient. Curing time 30 min. Thermal stability up to 150 °C.

Approx. 70-80 sqm./liter.

5 liter. (10 L/box)

Fiberglass Shield

Fiberglass Shield

High gloss, high release power. No build-up. Multiple number of releases. Curing time 30 min. Thermal stability up to 480 °C.

Approx. 130 sqm./liter.


3,75 liter (15 L/box)

Chemlease 41-90 EZ

Chemlease 41-90 EZ

Chemlease® 41-90 EZ is a rapid curing semi-permanent mould release agent that provides multiple releases with minimal transfer to the moulded part. Chemlease® 41-90 EZ a high slip version of the Chemlease® 41 family; primarily for closed moulding of abrasive or low draft parts..

All mould types. Requires 1-2x sealer EZ. Container size: 680 gram or 3,4 kg.

Chemlease 75EZ

Chemlease 75EZ

high gloss, medium-high slip - for polyester.

is a unique semi permanent mold release system developed specifically for the composites industry, for use where a high quality finish is required. Benefits: HAPs free* / Multiple releases between application / Easy to apply / Eliminates the use of wax / Reduces labor time and costs / Provides excellent gloss / High temperature stability / Does not build up on the mold surface / Minimal transfer to molded part.​

Chemlease 2185

Chemlease 2185

high gloss, medio/low slip - for polyester; no sealer

Solventbased Semi-Permanent - but contains 1-2% wax - For all mould types and to be used without sealer. Small parts, low-temp. Does not require an extended cure. Increases gloss. Wax is removed during wiping off limiting build-up. It´s a L-products with strong solvent. Effective for composites including polyester molding. It is a ready-to-use liquid dispersion.​

Chemlease 2191W

Chemlease 2191W

A59 Waterbased Release Agent - Epoxy.

Chemlease® 2191W is a semi-permanent water-based release agent, which is effective for composite molding including processes using vacuum bagged epoxy carbonfiber prepreg components. It gives minimal transfer of release agent and multiple releases.

Chemlease 2196W

Chemlease 2196W

A65 Waterbased Release Agent -Polyester.

Chemlease® 2196W is a semi-permanent, waterbased release agent for FRP composite molding provides improved release ease for deep-draw moldings. No Sealer used, 6 coats in total. Contain silicone.

Chemlease 2704W

Chemlease 2704W

Chemlease® 2704W provides minimal transfer of release agent, high-temperature stability, high abrasion resistance and is capable of multiple releases. Chemlease® 2704W cures rapidly and is a ready-to-use,environmentallyfriendlyproduct.This Chemlease® product is designed to be applied from room temperature, up to 200°C/424°F. Medium/low slip for polyester/vinylesterproductions.

Chemlease 2720

Chemlease 2720

Solventbased Semi-Permanent release agent for Epoxy and polyester productions. High slip, high gloss. Replaces ZyvaxMultishieldand Fiberglass shield. Wipe-on/Wipe-off, fast curing. Multiple releases. 3,75 liters per container.

Chemlease 2721

Chemlease 2721

Solventbased Semi-Permanent release agent for polyester productions -medio/low slip -contains 1-2% wax. Suitable for all mouldtypes-for bigger moulds, to prevent pre-release. To be used without sealer. 3,75 liters per container.

FLEX-Z 1.0

FLEX-Z 1.0

MINIMUM SLIP
Inhibits pre-release and promotes tape adhesion

FLEX-Z 2.0

FLEX-Z 2.0

LOW / MEDIUM SLIP
Ideal for the occasional pre-release problem

FLEX-Z 3.0

FLEX-Z 3.0

MEDIUM SLIP
Standard choice for large hulls and flat areas

FLEX-Z 4.0

FLEX-Z 4.0

MEDIUM / HIGH SLIP
If you don't know where to start, start here

FLEX-Z 5.0

FLEX-Z 5.0

HIGH SLIP
Excellent choice for small parts and high wear areas

FLEX-Z 6.0

FLEX-Z 6.0

EXTRA SLIP
Use on difficult-to-release male molds or as a flange release