SPRAY GUNS & EQUIPMENT

Use our Spray Guns for spraying with our release systems. Our Spray Guns are flexible and make sure you use same amount at every application.

PNEUMATIC SPRAY GUN


Pneumatic Spray Gun (Total system)

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Our Pneumatic Spray Gun is suitable for spraying with our Flex-Z release agents and/or water-based slip coats. In addition, it has an attractive price level!

1 pc. per package

Item no.:
W3FZ03111

Download Datasheet

[/expander_maker]

Container for Pneumatic Spray Gun

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Container for Pneumatic Spray Gun in steel.

Size
2 L

Item no.:
W3FZ3TANK2LT

[/expander_maker]

Pneumatic Spray Pistol
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

The Pneumatic gun has two entrances, one for the product and one for compressed air. With the opening regulator you can easily control the air passage and a spray regulater makes it possible to adjust the spray width of the release agent application.

Item no.:
W3FZ3GUN

[/expander_maker]

Hose for Pneumatic Spray Gun
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Compressed air hose of ½ inch in diameter. The Transparent part carries the product from the container. The blue part supplies the compressed air to the gun.

Item no.
W3FZ3MHOSE

[/expander_maker]

Rubber gasket for Pneuamtic container

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Rubber gaskets that fits the lid of the Pneumatic Spray Gun steel container.

Item no.:
W3FZORING

[/expander_maker]

POLYCON SPRAY GUN


Polycon Spray Gun (Total system)

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Our popular Polycon Spray Gun uses a selection of plug-in nozzles and plug-in containers. Nine sizes of nozzles and two sizes of containers give total flexibility for size of job, rates of application and various gelcoats viscosities. The Polycon Gun is easy and simple to clean.

1 pc. per package

Item no.:
A0016351

Download Datasheet

[/expander_maker]

Hose for Polycon
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Size

Item no.:

[/expander_maker]

Container for Polycon
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

There are two sizes of re-usable polythene containers.

1,5 liter

Item no.:
421106041

[/expander_maker]

Lid for Polycon container
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Lid for Polycon container. The lids have a nozzle hole and a small vent hole and are also supplied without holes for storing spray materials in the container.

Item no.:
821090041

[/expander_maker]

Nozzles for Polycon
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter.

Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer.

Item no.:
PO260301 (1)
PO260324 (2)
PO260325 (3)
PO260326 (4)
PO260303 (6)
PO260330 (7)
PO260302 (8)
PO260306 (9)

[/expander_maker]

O-ring for nozzles
 

[expander_maker id=”1″ more=” + Description ” less=”- Close”]

Item no.:
PO260308

[/expander_maker]