Shop

Chemlease 2704W (Solvent based) Chemlease 2704W provides minimal transfer of release agents, high-temperature stability, high abrasion resistance, and is capable of multiple releases. The product has a medium/low slip and is to be used in polyester and vinylester productions 3,75 kg Item no.: 1154450493

TASKI Ultra plus Telescope handle The Jonmaster Ultra Telescope handle is available in two sizes both adjustable in length. The handle fits on JM Ultra Mop Frame Velcro and Mop Frame 100 cm 1 pc. per package Sizes 100-170 cm (item no.: 7520277) 60-105 cm (item no.: 7520278)

Acrylic Mop Pad Use the long-haired mop pad for removal of dust, cured resin particles, tape residue etc. Use one pad on Mop Frame 100 cm or two pads on Sacks Mop Frame 1 pc. per package Size Length: 100 cm Weight: 310g Item no.: 7517411

Polycon Spray Gun (Total system) Our popular Polycon Spray Gun uses a selection of plug-in nozzles and plug-in containers. Nine sizes of nozzles and two sizes of containers give total flexibility for size of job, rates of application and various gelcoats viscosities. The Polycon Gun is easy and simple to clean. 1 pc. per package

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Granudan Heater for 1000 L IBC container The container heater like this is the perfect product for heating liquid in a 1000 liter container (IBC container). The container heater is equipped with up to 3 easily operated thermostats that can be adjusted from 0 - 90°C and thereby safely and quickly heats liquids to a desired temperature or ensures a specific viscosity of the contents of the container. The IBC Container heater is designed in light and extremely long-lasting materials that, together with the included snap locks, make it easy to mount and remove the container heater. This also makes the heater optimal and easy to use for the transport of containers, where the contents must be secured at a specific temperature or viscosity. For faster heating and reduced heat loss, it is recommended to supplement with an IBC insulated lid. The IBC Container Heater can be used to heat a wide range of liquids, including water, resin, oil, diesel oil and many other industrial liquids and allows them to be pumped or poured out of the container without problems.

• Volt/Watt: 230V-1300W
• Degrees: 0-40°C
• Size: 4400x1000 mm

1 pc. per package

Fiber Scraper from Granudan, 40x200x4 mm Avoid damages to your mold and tools by using our unique Fiber Wood chisels – no damages to mold, less repairs, reusable, higher safety! We supply in 3 sizes -  also with handles if needed.

Granudan Ultraheat PS-Silicone Heating Blanket - Insulated Our heating blankets are the optimal product when it comes to safely and efficiently heating elements to a specific temperature for up to 90°C. Industrial heating blankets makes it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heatspreader on the desired material. Industrial heating blankets are used in many industries, including blade repair on wind turbines, repair and production of both the marine industry and the aerospace industry. Granudan blanket is designed in durable but highly flexible and light material with the ability of heating to a maximum temperature of 90°C. This blanket has a 7mm insulation that both ensures to retain heat, but simultaneously also makes the blanket resistant both indoor and outdoor, ensuring a longer lifetime. Industrial heating blankets are produced either with a controllable thermostat box or with a bimetal fixed temperature controller.

• Volt/Watt: 230V-200W
• Degrees: 0-90°C
• Size: 1500x290mm

Granudan heating blankets are available in many standard sizes with different output. See our many heating blankets. 1 pc. per package

Use our spraybottle with closed presure tank to spray out the wet liquids in a fast and easy way. Remember to spread thin and even out the coat with a mop afterwards.

Professional Backing Pads Professional Backing Pads, with an efficiently designed airflow channel for improved dust extraction and decreased dust accumulation on the disc, offer a wide range of compatibility with versions of 150 mm multi-hole discs. Have a look at other Smirdex products 1 pcs per package

Smirdex 750 CERAMIC NET is ideal for tougher and more demanding applications, such as on epoxy, metal, hard wood and other solid surface materials. It also offers an excellent performance and lifespan on primer sanding. Dust-free sanding: Thanks to its net fabric structure the 750 Ceramic Net Velour discs achieve maximum particle absorption, for a much cleaner and healthier working environment. Maximum product lifespan: The net structure prevents fast clogging compared to conventional paper discs, thus prolonging the product’s lifespan. For maximum results, combine it with our pad savers (950). We also recommend our 960 multihole backing pads.

Farecla, Profile 200 Select Coarse Cut Liquid Compound 1 pc. per package Profile 200 Select is a great value, versatile cutting compound aimed at OEM applications. Used with a G Mop Twisted Wool Compounding Pad, Profile 200 Select quickly removes P800 or finer sanding marks from tooling or production gel coats in a one-step process. Performs best when shaken before use and run at high speed (2000 – 3500rpm)

• Eliminates sanding marks and heavy defects from production and tooling gelcoat surfaces
• Can be used as a one-step process from P800 or P1000 for fast polishing of white production gelcoats in areas where a mirror finish is not required
• 100 ml sample tube now available

1 litre

Farecla G6, Rapid Grade Pasta Compound, tube 1 pc. per package G6 Rapid Grade Paste Compound is for use on OEM, Refinish Medium Solids and Air Dried 2k paint systems (well cured).

• Permanent Finish removes P1500 abrasive marks quickly and easily with no fillers
• Silicone Free can be used in body shops and applied nearby to where paints are used
• High Gloss System can be used with G10 Finishing Compound for an enhanced gloss finish

400 g

G-Mop advanced back plates A 6″ back plate designed for use with our Advanced AGM-CF and AGM-PF applicators. Back plates available in 6″ and 8″ sizes. 6"

Farécla G3 Pro Produkt The G3 Pro Applicator Waffle Pads reduce effort and increase effectiveness when applying G3 Pro products. Their unique surface minimises wastage and ensures you get the ultimate finish in the shortest time.

• Two Waffle Pads – 1 x Restore, 1 x Finish
• Minimises wastage
• Easy to use
• Easy to clean

Fine-Spray Gun W3/FZ-Duo The SCHÜTZE FINE-SPRAY gun W3 FZ-Duo is designed specially to handle sprayable fluids of very low viscosities. Fine co-ordination of precision made nozzle, needle and aircap produce an atomizing result which particularly when applying release agents gives an extreme smooth lay on in moulds and dies. In accordance to latest regulations, only release agents free of CFC will be allowed. These agents provide a smooth finish of fine droplets to the surface, when applied with this gun. Worldwide this very handy gun is most popular within the field of thermoplastic industries and the founding industries. The short gun body and the Duo-feed hose, which passes fluid as well as atomizing air through the grip, allows always comfortable handling. Available nozzle dimensions: ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm

• Different nozzle extensions available
• Aircaps for different spray angles available
• Duo-feed hose in all lenghts further versions on request. Also available in HVLP-technique and version „KLS“ for application of adhesives
• Also available as high pressure version

Compressed air micrometer with gauge: The Schütze compressed air micrometer is for exact adjustment of inlet atomizing air pressure of spray gun. It can be installed, also later, to each spray gun.

Farécla package 7 consists of following 4 products: Profile 100 Extra 100 ml

• Profile 100 Extra, is an aggressive compounding paste for tough resins and gelcoatss.
• Often used in the first stage of a two-step polishing process when high gloss is required.

Profile 200 Select 100 ml

• Profile 200 Select is a great value, versatile cutting compound aimed at OEM applications.
• Eliminates sanding marks and heavy defects from production and tooling gelcoat surfaces.

Profile 400 Advanced Plus 100 ml

• Profile 400 Advanced offering the highest level of cut and gloss on painted surfaces and wood lacquers.
• Less likely than others to require a second finishing step.

Profile 700 Finish 100 ml

• Profile 700 Finish Light Cut Polish & Swirl Remover is a very fine finishing compound designed to remove any light swirl marks and holograms from high quality painted lacquered and gel coat surfaces to leave the ultimate high gloss finish.

Also have a look at our other products from Farécla

740 Ceramic Line Velour Discs Smirdex 740 Ceramic Line offers fast cutting products with improved performance that last significantly longer than the conventional abrasives, since a water-based stearate coating provides maximum load resistance, thus extending the life of the product. The Ceramic grains of this line provide long-lasting sharp edges, offering better finishing results on the treated surfaces. The 740 Ceramic products are perfect for sanding any type of material, such as scratch resistant varnishes and e-coats, primers and composites, eliminating the need for specialty products. Applying increased working pressure becomes easier for the user, when sanding with 740 series, thus providing high removal rates. Moreover, the hole pattern contributes to a dust-free environment, protecting the worker from the dangerous sanding dust particles. Granudan sells the following grain sizes: P40 + P80 Have a look at other Smirdex products 100 pcs. per package

750 Ceramic Net Velour Discs Smirdex 750 CERAMIC NET is ideal for harder and more demanding applications, such as on epoxy, metal, hard wood and other solid surface materials. 750-series also offers an excellent performance and lifespan on primer sanding. Dust-free sanding: Thanks to its net fabric structure the 750 Ceramic Net Velour Discs, Ø225 maximum particle absorption, for a much cleaner and healthier working environment. Maximum product lifespan: The net structure prevents fast clogging compared to conventional paper discs, thus prolonging the product’s lifespan. For maximum results, combine it with our pad savers (950). We also recommend our 960 multihole backing pads. Granudan sells the following grain sizes: P60, P80, P100, P120, P150, P180, P220, P240, P320 + P400 Have a look at other Smirdex products 50 pcs. per package

Smirdex Pneumatic Orbital Sander The new series of sanders by Smirdex has been specially designed for professionals as it combines all those elements that contribute to high quality precision sanding. Facts Weight: 0.9 kg Rotation speed: 11000 rpm Have a look at other Smirdex products 1 pcs per package

Granudan Ultraheat PS-Silicone Heating Blanket - Insulated.  Our high temperature industrial heating blankets are the optimal product when it comes to safely and effectively, having to heat elements to a specific temperature for up to 120°C. Industrial heating blankets makes it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heatspreader on the desired material. Industrial heating blankets are used in many industries, including repair of wind turbine blades, repair and production of both the marine industry and the aerospace industry. Granudan blanket is designed in durable but highly flexible and light material with the ability of heating to a maximum temperature of 120°C. This blanket has a 7mm insulation that both ensures to retain heat, but simultaneously also makes the blanket resistant both indoor and outdoor, ensuring a longer lifetime. Industrial heating high temperature blankets are produced with an adjustable temperature controller Granudan heating blankets are available in many standard sizes with different output.

• Volt/Watt: 110V-1500W
• Degrees: 0-120°C
• Size: 3000x500mm

1 pc. per package

Backing Pad from Smirdex A special backing pad at 150mm of medium hardness, with 97 holes, it is applicable for use with the 750 net discs, for maximum dust extraction effects. Have a look at other Smirdex products 1 pcs per package

Chem-Trend® product Chemlease® 255 is an abrasion resistant release product, which provides excellent high-slip properties. For various plastic and rubber moulding applications, except for silicone rubber. The price is indicated per kg Minimum purchase 1 can (0.71 kg)

Chem-Trend® product Chemlease Mold Cleaner EZ is a blend of solvents designed for removal of wax and contaminants from composite molds Apply with 100% cotton cloths before the first layer of release coats. The product is also excellent for cleaning brushes and equipment The price is indicated per kg Minimum purchase 1 can (3,8 kg)

White high-quality cotton cloths in rolls from Granudan For a safe and uniform application of all Granudan release agents, it is recommended to use our white high-quality cotton cloths. For best results and to avoid holograms, use a new clean cotton cloth each time. Cotton cloths are sold in rolls in specific kg/metre measurements.

• Single layer 100% cotton
• Size 70 cm wide

Remaining stock sale of cotton cloths in rolls. Sold in the following measurements, as long as the item is in stock:

• 2,70 kg = 11 meters
• 5,30 kg = 21 meters
• 7,90 kg = 34 meters
• 10,20 kg = 42 meters

The price is indicated per kg.

Pneumatic Spray Gun-duo (Complete Package) Granudan spray gun is designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Fine coordination of precision-made nozzle, needle and air cap gives an atomization result which, especially when applying release agents, gives an extremely smooth coating in molds and other recesses. These agents provide a smooth finish of fine droplets to the surface when applied with this gun. The spray gun has two inputs, one for product and one for air compressor. With a regulator, you can easily control the air passage, and a spray regulator makes it possible to adjust the amount, range and spray angle of the release agent during application. The short gun body and the Duo-feed hose, which passes liquid and atomizing air through the grip, always provide comfortable handling. Worldwide, this highly practical gun is most popular in the thermoplastics and foundry industries. In accordance with the latest regulations, only CFC-free release agents will be permitted. Furthermore, the spray gun has an attractive price level. 1 piece. per package

Granudan Waterclean (Water-based) The product is very effective and removes everything! Both sealer, release agents, etc. An obvious means of preparing surfaces for painting, or other processes that require a completely clean surface. At the same time, Waterclean has been developed to provide an effective water-based alternative to solvent-based cleaners such as "Granudan Mold Cleaner". The product should be used with water and may not dry out on surfaces. We recommend using water for removal. This product is easy to use and contains no (PFAS) fluorine-containing substances and is therefore not harmful to the environment or in the production. The price is indicated per litres Minimum purchase 1 can (4 litres)

Granudan Multi-Shield (Solvent based) Our Multi-Shield has a very high slip, and a high number of releases. The product is comparable to Watershield. No buildup. Suitable for polyurethane. This product is easy to use and contains no (PFAS) fluorinated substances. PPE should be used according to SDS instructions. Curing time: 15 min. between coats and 30 min. after final coat in room temperatures at min. 20°C Thermal stability up to 480°C Approx. 100-130 sqm./liter. Minimum purchase 1 can (3,75 litres)

Zyvax Flex-Z 1.0 (Solvent based) MINIMUM SLIP    –    Prevents pre-release and enhance adhesion from tapes. Flex-Z 1.0-6.0 is a release agent system for polyester productions, offering four different levels of release power. This allows you to flexibly adjust the release level – the top layer simply determines the release level. We recommend applying two layers of "Granudan Sealer GP" when starting with Flex-Z. The product should be applied and not wiped off. It cures quickly. This product can also be sprayed on (see our selection of HVLP spray solutions). It is particularly well-suited for moldings within the marine, sports equipment, swimming pools, and spa industries. Minimum purchase 1 can (5 litres/3,5 kg)

The ATEX Pro Series Drum Heater is engineered for safe and efficient heating in explosion-proof environments. Designed for drums in Zones 1, 2, 21, and 22, it delivers reliable performance with self-limiting heating technology. Ideal for maintaining low-temperature processes and frost protection, it features robust, anti-static PVC fabric and a user-friendly ATEX-certified junction box. Perfect for industries handling volatile chemicals or requiring stringent safety standards.

• • Volt/Watt: 230V-1200W  
  • You must add a Controller (Item#: GR-23-4258).
  • Size: 2100x800mm.
  1 pc. per package Ask for more variants and drum sizes (120L / 100L / 60L / 30L)

The IBC Top Cover is a versatile lid that fits any standard 1000L IBC container.

• Compatible with IBC Container Heater and IBC Insulation Body Cover
• Minimizes heating loss and helps maintain temperature
• Strategically placed velcro pad for easy access to container opening
• Universal design for easy installation on any standard IBC container

TASKI Versa Plus bottle The TASKI Versa bottle fits on TASKI Versa Plus mop. Available in three colors; red, blue, and green. We recommend you choose a different color for each product you use 1 pc. per package Size600 ml. Item no.: 7524158 (red) 7524159 (blue) 7524160 (green)

Granudan Saks mop frame Our frame comes complete with handles and frame. The product has a mop frame in double size and is particularly suitable for quickly wiping large areas, such as windmill molds and for cleaning other large areas. Purchased together with two pcs. Acrylic mops. 1 pc. per package Size Length: 2 x 100 cm Weight: 800 g

Carbon Fiber handle New product! Ultra light Carbon handle fixed size 230 cm. Less weight and easier control for operators 1 pc. per package Size 20x23x2300 mm

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

O-ring for nozzles

Granudan High Quality Latex Cover Shoes (HQCOVSH) are used for safe walking in blade-moulds on wet release-film. The cover shoes leave minimum marks on the mould surface and protect the worker from falling on a slippery surface. We offer four different sizes with size mark both on the shoe sole and front. It is easy to wrap the cover shoes around existing safety shoes, when entering the mould for release application. 1 pair per bag Size: M/L: 303mm

Granudan Tromleopvarmer til 50-60 L With a drum heater from Granudan, you can easily, safely and quickly heat liquids to a desired temperature. This barrel heater has thermostat control, which is either supplied as a 0-40°C or 0-90°C thermostat. Our barrel heater is designed in light and extremely long-lasting materials, which, together with the supplied snap locks, make it easy to mount and dismount the drum heater. This also makes the drum heater optimal and easy to use for the transport of drums, where the contents must be secured at a specific temperature or viscosity. The drum heater can be used to heat a wide range of liquids, including water, resin, oil, diesel oil and many other industrial liquids.

• Volt/Watt: 230V-300W
• Degrees: 0-90°C
• Size: 1330x460 mm

1 pc. per package

Granudan Ultraheat PS-Silicone Heating Blanket - Insulated Our heating blankets that are the optimal product when it comes to safely and efficiently heating elements to a specific temperature for up to 90°C. Industrial heating blankets makes it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heatspreader on the desired material. Industrial heating blankets are used in many industries, including blade repair on wind turbines, repair and production of both the marine industry and the aerospace industry. Granudan blanket is designed in durable but highly flexible and light material with the ability of heating to a maximum temperature of 90°C. This blanket has a 7mm insulation that both ensures to retain heat, but simultaneously also makes the blanket resistant both indoor and outdoor, ensuring a longer lifetime. Industrial heating blankets are produced either with a controllable thermostat box or with a bimetal fixed temperature controller.

• Volt/Watt: 230V-200W
• Degrees: 0-90°C
• Size: 600x600mm

Granudan heating blankets are available in many standard sizes with different output. See our many heating blankets. 1 pc. per package

Handle for fiber scraper from Granudan, 12x80x4 mm Avoid damages to your mold and tools by using our unique Fiber Wood chisels – no damages to mold, less repairs, reusable, higher safety! The handles are available in 3 sizes. 1 pc. per package

Smirdex 750 CERAMIC NET is ideal for tougher and more demanding applications, such as on epoxy, metal, hard wood and other solid surface materials. It also offers an excellent performance and lifespan on primer sanding. Dust-free sanding: Thanks to its net fabric structure the 750 Ceramic Net Velour discs achieve maximum particle absorption, for a much cleaner and healthier working environment. Maximum product lifespan: The net structure prevents fast clogging compared to conventional paper discs, thus prolonging the product’s lifespan. For maximum results, combine it with our pad savers (950). We also recommend our 960 multihole backing pads.

Smirdex 750 CERAMIC NET is ideal for tougher and more demanding applications, such as on epoxy, metal, hard wood and other solid surface materials. It also offers an excellent performance and lifespan on primer sanding. Dust-free sanding: Thanks to its net fabric structure the 750 Ceramic Net Velour discs achieve maximum particle absorption, for a much cleaner and healthier working environment. Maximum product lifespan: The net structure prevents fast clogging compared to conventional paper discs, thus prolonging the product’s lifespan. For maximum results, combine it with our pad savers (950). We also recommend our 960 multihole backing pads.

Farecla, Profile 700 Finish Light Cut Polish and Swirl Remover 1 pc. per package Profile 700 Finish Light Cut Polish & Swirl Remover is a very fine finishing compound designed to remove any light swirl marks and holograms from high quality painted lacquered and gel coat surfaces to leave the ultimate high gloss finish. It will not scratch and is particularly good on soft coatings which are susceptible to swirl marks. Profile 700 Finish is ideally applied using a Farécla G Mop Finishing Foam, which was engineered in tandem with the compound to provide optimum performance. For a higher cut, use with a G Mop Lambs Wool Pad.

• Eliminates minor defects and swirls from paint, lacquer and gelcoat surfaces, leaving a mirror shine finish
• Now VOC-free
• Enhanced workability
• Very easy wipe off
• Often used as a second step after compounding, especially after Profile 200 Select

100 ml

Non-slip rubber cover shoes Low quality non-slip cover shoes - price per couple. Available in yellow in one size. For single use only size: Medium, 335 mm

Farecla G-Mop. Flexible Back Plate, 6" Our G-Mop, flexible backing plate allows improved handling performance. Flexible Back Plates allow applicator pads to ride swages and contours for ease of compound application in difficult areas. Our flexible yellow back plates is also available in 8″. "Farecla G-Mop. Flexible Back Plate 8"

• Granudan sells the following sizes back plates 6" and 8"

1 pc. per package

Farécla G3 Pro Product 1 pc. per package G3 Pro Resin Superwax is an interlinked protection system constructed a specific blend of waxes to provide an easy to apply concentrated liquid wax with unprecedented protection for up to 4 months and mirror gloss finish. The wax protects bodywork from the everyday traffic film that builds up on the surface.

• Long-life, high gloss finish
• Easy glide wax
• Up to 4 months protection

Recommended for cars, marine and caravans, among other things 500 ml.

Farécla G3 Pro Product G3 Pro Spray Wax enhances the surface gloss level and prolongs previously applied wax finishes. It is silicone-free, temperature insensitive and contains UV inhibitors. Outstanding water repellency properties to keep your vehicle clean for longer. Very quick and economical because only a light mist buffed off immediately is enough for optimum performance. Does not stain rubber or plastics. Use on wet or dry paintwork, gel coats or lacquered surfaces to quickly restore that ‘just waxed’ look.

• Quick, easy and durable
• Does not stain rubber or plastics
• Contains UV inhibitors
• Silicone free – bodyshop safe

Sample package 2 consists of the following 3 water-based products: Granudan Cleaner GR-08

• GR-08 is an effective and environmentally friendly cleaning agent that can replace solvent-based cleaning agents. The product is an effective degreaser, but does not remove solvent-based release agents.

BreeZ Sealer BN201

• Sealer BN201 is an effective VOC-free and clear sealer that forms a protective shield on the mold or tool surface. Extends the strength and durability of the slip effect.

Granudan Aqua Slipcoat 506

• The product is a universal water-based release agent consisting of polymer and liquid wax. Suitable for both polyester, vinylester and epoxy productions.

Also try our other environmentally friendly product Sample package 3

Farécla G3 Pro Product 1 pc. per package G3 Pro Glass Cleaner is a powerful, high performance cleaner that cuts through dirt, grime and road film without leaving smears, streaks or rainbows when using window wipers.

• Quick and easy application
• Smear and streak free finish
• Silicone free – bodyshop safe

Recommended for cars, marine and caravans, among other things 500 ml.

510 White Line Velour Discs Smirdex 510 White Dry Sanding series is a universal series of value-for-money products. It is suitable for the car body repair and marine industry, in order to sand primers, putties and varnishes. Considering the finer grits of the line, they are highly recommended for the furniture industry. Furthermore, they can be used for sanding wallboards and plasters in building constructions. The open structure of the abrasive grain and the stearate top-coating enhance durability, preventing clogging and loading. The high-quality grip backing offers excellent adhesion to the pad. Granudan sells the following grain sizes: P60, P80, P100, P120, P150 + P180 Have a look at other Smirdex products 100 pcs. per package

740 Ceramic Line Velour Strips Smirdex 740 Ceramic Line offers fast cutting products with improved performance that last significantly longer than the conventional abrasives, since a water-based stearate coating provides maximum load resistance, thus extending the life of the product. The Ceramic grains of this line provide long-lasting sharp edges, offering better finishing results on the treated surfaces. The 740 Ceramic products are perfect for sanding any type of material, such as scratch resistant varnishes and e-coats, primers and composites, eliminating the need for specialty products. Applying increased working pressure becomes easier for the user, when sanding with 740 series, thus providing high removal rates. Moreover, the hole pattern contributes to a dust-free environment, protecting the worker from the dangerous sanding dust particles. Granudan sells the following grain sizes: P40 Have a look at other Smirdex products 50 pcs. per package

Farecla, Profile 350 Premium Liquid

• Rapidly eliminates P1200 scratches from GRP
• Very effective on dark GRP surfaces
• Can also be used on painted surfaces to restore colour

Profile 350 Premium Liquid GRP Fast Medium Cut Liquid Compound is a high performance, water-based cutting compound which removes P1200 or finer sanding marks from production gel coats and painted finishes, and is the perfect solution for restoring oxidised and weathered gel coat surfaces. Great on dark colours, Profile 350 Premium Liquid delivers a high gloss finish and is used as a one step product on white gel coats and as the first stage of a two part compounding process where higher gloss and lower swirl is required.

Granudan Ultraheat PS-Silicone Heating Blanket - Insulated Our high temperature industrial heating blankets are the optimal product when it comes to safely and effectively, having to heat elements to a specific temperature for up to 120°C. Industrial heating blankets makes it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heatspreader on the desired material. Industrial heating blankets are used in many industries, including repair of wind turbine blades, repair and production of both the marine industry and the aerospace industry. Granudan blanket is designed in durable but highly flexible and light material with the ability of heating to a maximum temperature of 120°C. This blanket has a 7mm insulation that both ensures to retain heat, but simultaneously also makes the blanket resistant both indoor and outdoor, ensuring a longer lifetime. Industrial heating high temperature blankets are produced with an adjustable temperature controller Granudan heating blankets are available in many standard sizes with different output.

• Volt/Watt: 110V-1140W
• Degrees: 0-120°C
• Size: 2000x500mm

1 pc. per package

Farecla G-Mop. Flexible Back Plate, 8" Our G-Mop, flexible backing plate allows improved handling performance. Flexible Back Plates allow applicator pads to ride swages and contours for ease of compound application in difficult areas. Our flexible yellow back plates is also available in 6″. "Farecla G-Mop. Flexible Back Plate 6"

• Granudan sells the following sizes back plates 6" and 8"

1 pc. per package

Lusin Alro LL 261 Lusin Alro LL 261 is a silicone-free release agent based on PTFE. Suitable for mould temperatures up to 260°C (500 °F). The white air-drying film adheres to metal, plastic, and glass surfaces and shows excellent release and sliding effects. The high efficiency ensures several release cycles without further application The price is indicated per pcs. 12 cans of 400 ml in a box

Chem-Trend® product Chemlease® 15 Sealer EZ is a high-performance sealer that reduces mold porosity. The product acts as a base for new or reconditioned molds (Solvent based) The price is indicated per kg Minimum purchase 1 can (0,71 kg)

Smirdex Metallic Hand Sanders for velour strips A practically designed hand sander, with a durable metallic body and an innovative velour sanding surface, adding precision and consistency to the sanding result. Facts: 70 x 400 mm, 0 holes Have a look at other Smirdex products 1 pcs per package

Granudan Enviroshield (Water-based) Our Enviroshield (a BreeZ product) has a medium/high release effect, contains no solvents and has a water content of 96-98%. Enviroshield has been developed for larger molds where the items are generally easier to demould. We recommend this product for, among other things, epoxy productions with the use of gelcoats.. This product is easy to use and contains no (PFAS) fluorine-containing substances and is therefore not harmful to the environment or in the production. Curing time: 15 min between applications, 30 min after last application Thermal stability up to 260°C Approx. 130 sqm./liter. The price is indicated per litres Minimum purchase 1 can (4 liters)

Honey Plus Wax® reduces man hours due to its exceptional ease of application and buffing. It is an excellent mold release agent providing reproducibility, glossiness, and a non-staining, hard releasing film which are important to the fabricator. Honey Plus Wax® Mold Release is available in:

• 397 gr. per can (14-ounce), 12 cans per case
• Shelf life: 5 years

Granudan Composite-Shield (Solvent based) Our Composite-Shield (a BreeZ product) provides a moderate release effect. Used for larger boat molds and for molds where you do not want too good release. Granudan Composite-Shield prevents pre-release and has a high number of releases. We recomment the mold to be treated with ”Granudan Sealer GP” before using the Granudan Composite-Shield. This product is easy to use and contains no (PFAS) fluorine-containing substances. PPE should be used according to SDS instructions. Curing time: 15 min. between coats and 30 min. after final coat in room temperatures at min. 20°C Thermal stability up to 480°C Approx. 100-130 sqm./liter. Minimum purchase 1 can (3,75 litres)

Chem-Trend® product Chemlease 2185 creates high gloss and a medio/low slip. The product is solvent based semi-permanent but contains 1-2% of wax. Can be used on all mold types Use for small parts and low temperatures. Chemlease 2185 does not require an extended cure The price is indicated per kg Minimum purchase 1 can (3,4 kg)

Granudan's approved LDPE spray bottle for easy, quick, and safe application of both our water-based and solvent-based release agents. Use the swan neck to moisten a cloth or apply directly to the mold surface with precise control over the amount, reducing the risk of spillage. The bottle has a wide neck for easy filling, along with a practical color-coding system on the PP lid to prevent product mix-ups. This allows you to store multiple liquids, each with its designated color (e.g., Cleaner, Sealer, and release agents – or multiple release agents for different processes). The lids feature a precise nozzle tip, ensuring accurate and controlled dispensing. Additionally, the built-in vapor venting function prevents solvent dripping.

TASKI Ultra plus Mop Frame Use Ultra Mop Frame Velcro to wipe off release agents or cleaners. Buy this product with Jonmaster Ultra Telescope handle Available in two sizes 1 pc. per package Sizes 25 cm (buy with 100-170 cm handle) (item no.: 7520279) 40 cm (buy with 60-105 cm handle or 100-170 cm handle) (item no.: 7520280)

TASKI Standard Pro Damp Mop pad Use TASKI Standard Pro Damp Mop for application and/or wiping off sealer or release agents. Fits on JM Ultra Mop Frame Velcro and has Velcro backside for a quick change. Available in a blue color and washable up to 150 times 20 pcs. per package Sizes 40 cm and 88g (item no.: 7518127) 25 cm and 58g (item no.: 7518126)

Pneumatic Spray Gun-Single Granudan spray gun designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Fine coordination of precision-made nozzle, needle and air cap gives an atomization result which, especially when applying release agents, gives an extremely smooth coating in molds and other recesses. These agents provide a smooth finish of fine droplets to the surface when applied with this gun. The spray gun has two inputs, one for product and one for air compressor. With a regulator, you can easily control the air passage, and a spray regulator makes it possible to adjust the amount, range and spray angle of the release agent during application. The short gun body and the Duo-feed hose, which passes liquid and atomizing air through the grip, always provide comfortable handling. Worldwide, this highly practical gun is most popular in the thermoplastics and foundry industries. In accordance with the latest regulations, only CFC-free release agents will be permitted. Furthermore, the spray gun has an attractive price level. 1 piece. per package

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Granudan Drum Heater for 25 L With a drum heater from Granudan, you can easily, safely and quickly heat liquids to a desired temperature. Granudan drum heater has thermostatic control, which can be regulated from 0-200°C. Our drum heater is designed in light and extremely long-lasting materials, which, together with the supplied snap locks, make it easy to mount and dismount the drum heater. This also makes the drum heater optimal and easy to use for the transport of drums, where the contents must be secured at a specific temperature or viscosity. The drum heater can be used to heat a wide range of liquids, including water

• Volt/Watt: 230V-380W
• Degrees: 0-200°C
• Size: 1200x400mm

1 pc. per. package

White cotton cloth in various sizes. 10 kg. per bag. The price is indicated per kg.

Granudan Ultraheat PS-Silicone Heating Blanket - Insulated. Our high temperature industrial heating blankets are the optimal product when it comes to safely and effectively, having to heat elements to a specific temperature for up to 120°C. Industrial heating blankets makes it easy to heat up material including composite, carbon, epoxy prepreg and ensure a safe and uniform temperature distribution on the surface of the material. The blanket therefore acts as a perfect heatspreader on the desired material. Industrial heating blankets are used in many industries, including repair of wind turbine blades, repair and production of both the marine industry and the aerospace industry. Granudan blanket is designed in durable but highly flexible and light material with the ability of heating to a maximum temperature of 120°C. This blanket has a 7mm insulation that both ensures to retain heat, but simultaneously also makes the blanket resistant both indoor and outdoor, ensuring a longer lifetime. Industrial heating high temperature blankets are produced with an adjustable temperature controller Granudan heating blankets are available in many standard sizes with different output.

• Volt/Watt: 230V-430W
• Degrees: 0-120°C
• Size: 600x600mm

1 pc. per package

Pace mop with velcro backside - perfect applicator pad for Sealer and Release in a soft, short hair microfiber. A unique wet film application - not too much, not too less. Our clear recommendation for being in control with consumption. Can be washed and reused. We offer in sizes 60cm. and 40 cm.

Farécla Spray Bottle Use with products from G-series that require water for most optimal results

• Gives an even dispersal
• Ensures a supply of clean water to minimise contamination
• Can be used with all sprayable liquids

600 ml. 1 pc. per package

Smirdex 750 CERAMIC NET is ideal for tougher and more demanding applications, such as on epoxy, metal, hard wood and other solid surface materials. It also offers an excellent performance and lifespan on primer sanding. Dust-free sanding: Thanks to its net fabric structure the 750 Ceramic Net Velour discs achieve maximum particle absorption, for a much cleaner and healthier working environment. Maximum product lifespan: The net structure prevents fast clogging compared to conventional paper discs, thus prolonging the product’s lifespan. For maximum results, combine it with our pad savers (950). We also recommend our 960 multihole backing pads.

Farecla, Profile 100 Extra Heavy Cut Paste Compound 1 pc. per package Our “liquid sandpaper”, Profile 100 Extra is a coarse, water-based cutting compound designed for aggressive compounding on tough resins and gel coats. It removes P600 dry sanding marks from most substrates, leaving a relatively low gloss finish. Profile 100 Extra is often used in the first stage of a two-step polishing process when high gloss is required.

• Aggressive compounding paste for tough resins and gelcoats
• Leaves a low gloss finish
• Ideal for plugs and molds
• 100 ml sample tube now available

100 ml

Farecla G3, Regular Grade Pasta 1 pc. per package G3 Regular Grade Paste is a rubbing compound recommended for use on OEM and refinish paint systems to reliably cut P1500 or finer sanding marks. This versatile product can be used by hand or machine, to deliver permanent results – no fillers. For a high gloss finish, follow with G3 Fine Finishing Compound Use with a G Mop 6” Wet Use Compounding Foam (GMC606) for ease of use and low splatter.

• Reliable Cut for P1500 or finer
• Permanent Finish
• High Gloss System
• Silicone Free

3 kg

Farecla G-Mop quick change adaptor for double sided pads Quick screw fit system to polishing machines

• Screw on and off design
• For use with double sided pads
• 14 mm

1 pc. per package

The SCHÜTZE Fluid Sprayer WS 5/1 is designed for spraying liquids under pressure without atomizing air as under - water - watery solutions - oils - disinfectans - cleaning agents This fluid sprayer sprays in a hollow cone. A special sprayhead atomizes the fluid without atomizing air. Spraying water f.i. is possible by simply connecting the gun to any water supply line. The WS 5/1 is a robust and simply designed spraygun. Spiral hoses in different lengths available. Standard version: Type WS 5/1: Fluid sprayer, with 100 mm pipe, including 14,5 mm nipple diameter of nozzle plate: 0,8 mm weight: 330 g Available spiral hoses: - operating lenght approx. 6 m - operating lenght approx. 10 m

Farécla G3 Pro Product G3 Pro Multicleaner is a rigorous yet safe all purpose cleaner (APC) for use on all soft and hard surfaces, including engine bays, wheel arch liners, carpets and upholstery. It is a silicone-free cleaning product that will not discolour rubber, plastics, vinyl or fabric. For maximum performance use neat, but it can be diluted with water for lighter contamination. Finish with G3 Pro Resin Superwax or SuperGloss Paste Wax for the ultimate protection and super gloss result.

• Safe on all surfaces – no staining
• Breaks down oil and grease
• Powerful on stubborn marks
• Silicone free

Recommended for cars, marine and caravans, among other things

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

The 740 Ceramic Line offers fast cutting products with improved performance that last significantly longer than the conventional abrasives, since a water-based stearate coating provides maximum load resistance, thus extending the life of the product. The Ceramic grains of this line provide long-lasting sharp edges, offering better finishing results on the treated surfaces. The 740 Ceramic products are perfect for sanding any type of material, such as scratch resistant varnishes and e-coats, primers and composites, eliminating the need for specialty products. Applying increased working pressure becomes easier for the user, when sanding with 740 series, thus providing high removal rates. Moreover, the hole pattern contributes to a dust-free environment, protecting the worker from the dangerous sanding dust particles. Recommended for: Automotive, Composites, Wood Also have a look at our other Smirdex products