GRANUDAN Aqua Slipcoat 506

Contact for price

Granudan Aqua Slipcoat 506 (Water-based)

Aqua Slipcoat 506 has a high release power. The product is a combination of polymer and liquid wax

The product has high durability on rough materials and complicated molds. Use on both polyesters, vinylester, and epoxy.

This product is easy to use and contains no (PFAS) fluorine-containing substances and is therefore not harmful to the environment or in the production.

Curing time: 15 min between applications, 30 min after last application

Thermal stability up to 150°C

Approx. 70-80 sqm./liter.

The price is indicated per litres

Minimum purchase 1 can (5 litres)

SKU: AQUA506 Category:
Get price & Information


Granudan Aqua Slipcoat 506

Product information:

Aqua Slipcoat 506 is a combined water-based semi-permanent and waxy sealer and slipcoat in one product. Aqua Slipcoat 506 exhibits great durability against particularly abrasive materials.

It is recommended for all items that create extra wear on the mold and item in the casting process. This includes, among other things, Polymer Concrete, vinylester/polyester and epoxy productions, plug material, artificial marble, etc.

If Aqua Slipcoat 506 is used as both sealer and release agent, apply a minimum of 5 coats. For continuous production of many items, the use of ”Sealer BN201” (water-based) or ”Sealer GP” (solvent) is recommended as a protective film under the product, to optimize a higher production output per application, minimization of build-up, and protection of the mold surface. When starting up new molds, 2 layers are placed on top of the sealer.


  1. Apply a thin layer of Aqua Slipcoat 506 to a small area of the mold, using a clean, soft lint and lint free cotton cloth or sprayer. A wet pearly surface will appear.
  2. Wipe immediately afterwards with a new dry cloth – hard wiping is not necessary. Continue until the entire mold is processed. A wet continuous surface will appear.
  3. Wait at least 15 minutes, apply another thin coat. Wipe afterwards with a clean, soft, lint- and lint-free cotton cloth.
  4. Let the mold harden for at least 30 minutes at a room temperature of 18-21°C before using it. (For molds with a high surface temperature, the curing time will be shorter!)

When it is necessary to carry out a “touch up”, just 1 layer is applied, and production continues when the coat has hardened after 30 min. Aqua slipcoat 506 can be cleaned with our water-based ”Granudan WaterClean” and subsequently ”Cleaner GR-08”.

Demonstration of Granudan Aqua Slipcoat 506

Additional information

Release Agent System

Release Agent

You may also like…