+45 44 84 37 56
sales@granudan.dk
BreeZ Primer MPP C2698W
BreeZ Primer MPP C2698W (Water-based)
Our primer is the perfect solution for plug/master surfaces or if you wish to give a new life to a worn out mold surface.
After a short processing time, the primer forms an extremely strong and protective film on surfaces. Often the primer changes the surface tension and increases the gloss level.
The product has no release power and an appropriate sealer or release agent should be applied on top of the product after it has cured.
Primers reduce surface roughness and produce a uniform surface profile and chemical barrier on production quality plugs, masters, prototypes and composite molds and tooling. Mold primers also provide gloss, vacuum integrity and a preferred adhesive surface for semi-permanent sealers and release agents.
This product is easy to use and contains no (PFAS) fluorine-containing substances and is therefore not harmful to the environment or production.
The price is indicated per litre
Minimum purchase 1 can (3,76 kg)
Description
SANDING/CLEANING: Cleaning is essential. The mold surface must be cleaned thoroughly to remove all traces of debris and other release agents before application of BreeZ MPP C2698W can be attempted.
Differences from the Solvent-based MPP 712 EZ:
• In general, the water-based primer leaves more working time before curing.
• The water-based primer has a bit less gloss than the solvent-based – more coats will bring back the glossiness.
• 1-2 coats more of the water-based primer is necessary compared to the solvent-based.
• A small amount of ethanol makes the water-based primer flammable in marking and general handling. All other safety requirements are very similar to other water-based products.
Additional information
| Release Agent System | Primer |
|---|
