Spray guns and equipment

Pneumatic Spray Gun-Single Granudan spray gun designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Fine coordination of precision-made nozzle, needle and air cap gives an atomization result which, especially when applying release agents, gives an extremely smooth coating in molds and other recesses. These agents provide a smooth finish of fine droplets to the surface when applied with this gun. The spray gun has two inputs, one for product and one for air compressor. With a regulator, you can easily control the air passage, and a spray regulator makes it possible to adjust the amount, range and spray angle of the release agent during application. The short gun body and the Duo-feed hose, which passes liquid and atomizing air through the grip, always provide comfortable handling. Worldwide, this highly practical gun is most popular in the thermoplastics and foundry industries. In accordance with the latest regulations, only CFC-free release agents will be permitted. Furthermore, the spray gun has an attractive price level. 1 piece. per package

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

Pneumatic Spray Gun-duo (Complete Package) Granudan spray gun is designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Fine coordination of precision-made nozzle, needle and air cap gives an atomization result which, especially when applying release agents, gives an extremely smooth coating in molds and other recesses. These agents provide a smooth finish of fine droplets to the surface when applied with this gun. The spray gun has two inputs, one for product and one for air compressor. With a regulator, you can easily control the air passage, and a spray regulator makes it possible to adjust the amount, range and spray angle of the release agent during application. The short gun body and the Duo-feed hose, which passes liquid and atomizing air through the grip, always provide comfortable handling. Worldwide, this highly practical gun is most popular in the thermoplastics and foundry industries. In accordance with the latest regulations, only CFC-free release agents will be permitted. Furthermore, the spray gun has an attractive price level. 1 piece. per package

Container for Polycon Spray Gun There are two sizes of re-usable polythene containers. Our popular Polycon Spray Gun uses a selection of plug-in nozzles and plug-in containers. Nine sizes of nozzles and two sizes of containers give total flexibility for size of job, rates of application and various gelcoats viscosities. The Polycon Gun is easy and simple to clean. 1,5 liter

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

The SCHÜTZE Fluid Sprayer WS 5/1 is designed for spraying liquids under pressure without atomizing air as under - water - watery solutions - oils - disinfectans - cleaning agents This fluid sprayer sprays in a hollow cone. A special sprayhead atomizes the fluid without atomizing air. Spraying water f.i. is possible by simply connecting the gun to any water supply line. The WS 5/1 is a robust and simply designed spraygun. Spiral hoses in different lengths available. Standard version: Type WS 5/1: Fluid sprayer, with 100 mm pipe, including 14,5 mm nipple diameter of nozzle plate: 0,8 mm weight: 330 g Available spiral hoses: - operating lenght approx. 6 m - operating lenght approx. 10 m

Compressed air micrometer with gauge: The Schütze compressed air micrometer is for exact adjustment of inlet atomizing air pressure of spray gun. It can be installed, also later, to each spray gun.

Rubber gasket for pneuamtic Spray Gun model W 3 FZ Granudan spray gun W 3 FZ is designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Rubber gaskets that fits the lid of the pneumatic Spray Gun steel container.

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

Airless needle and nozzle kit for 5 mm

Lid for Polycon container Lid for Polycon container. The lids have a nozzle hole and a small vent hole and are also supplied without holes for storing spray materials in the container. Item no.: 821090041

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Fine-Spray Gun W3/FZ-Duo The SCHÜTZE FINE-SPRAY gun W3 FZ-Duo is designed specially to handle sprayable fluids of very low viscosities. Fine co-ordination of precision made nozzle, needle and aircap produce an atomizing result which particularly when applying release agents gives an extreme smooth lay on in moulds and dies. In accordance to latest regulations, only release agents free of CFC will be allowed. These agents provide a smooth finish of fine droplets to the surface, when applied with this gun. Worldwide this very handy gun is most popular within the field of thermoplastic industries and the founding industries. The short gun body and the Duo-feed hose, which passes fluid as well as atomizing air through the grip, allows always comfortable handling. Available nozzle dimensions: ø 0.2 / 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm

• Different nozzle extensions available
• Aircaps for different spray angles available
• Duo-feed hose in all lenghts further versions on request. Also available in HVLP-technique and version „KLS“ for application of adhesives
• Also available as high pressure version

Compressed air micrometer with gauge: The Schütze compressed air micrometer is for exact adjustment of inlet atomizing air pressure of spray gun. It can be installed, also later, to each spray gun.

Polycon Spray Gun (Total system) Our popular Polycon Spray Gun uses a selection of plug-in nozzles and plug-in containers. Nine sizes of nozzles and two sizes of containers give total flexibility for size of job, rates of application and various gelcoats viscosities. The Polycon Gun is easy and simple to clean. 1 pc. per package

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

Nozzle extension model angled: Extension spraying at an angle available in various versions:

• Outer tube with head 90°
• Outer tube with head 45°
• Outer tube with twin head 90°

Standard lenghts: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm Nozzle, aircap and front collar ring are not in extent of delivery. These parts to be taken from the gun fitted. When ordering please state spray gun model, model of extension, version of extension, length and nozzle size.

Hose for pneumatic Spray Gun from Schütze Granudan spray gun W 3 FZ is designed especially for handling sprayable liquids with very low viscosity. Our pneumatic spray gun is extremely suitable for applying our Flex-Z release agents and/or other water-based release agents. Compressed air hose of ½ inch in diameter. The Transparent part carries the product from the container. The blue part supplies the compressed air to the gun. 3 meter

Nozzles for Polycon Nine sizes of nozzles are available. Nozzles range in size from no. 1 (0.8mm) to no. 9 (7.1mm) bore diameter. Large diameters are for fast spraying of large areas or for spraying of high viscosity resins. Small diameters are best for better control in spraying small areas or for slower rates of application with low viscosity fluids such as thinned lacquer. Item no.: PO260301 (1) PO260324 (2) PO260325 (3) PO260326 (4) PO260303 (6) PO260330 (7) PO260302 (8) PO260306 (9)

O-ring for nozzles

Compressed air micrometer with gauge: The Schütze compressed air micrometer is for exact adjustment of inlet atomizing air pressure of spray gun. It can be installed, also later, to each spray gun.