BREEZ Release system for the Wind Industry
Products specific developed for the Wind Industry (Blade manufacturing). The products have improved “wetting properties” for large molds application. Significant less consumption, Easy & quick application using spaymops, safe environment, No smell, no (or less) protection, safety, Clean Environment; no solvent, .
WATERCLEAN is a non-hazardous, non-flammable Cleaner. WATERCLEAN eliminates sanding and/or solvent washing when preparing parts for painting, bonding or other processes that require a completely clean surface.
For a totally solvent-free mould cleaner, use WATERCLEAN. NOTE: Waterclean removes both Slipcoats & Sealers – The mould should be treated as a new mould, with Sealer and Slipcoats
BREEZ SEALER BN201
BREEZ SEALER BN201 creates a durable NON-VOC visible film with a superior adhesion to a variety of surfaces. BREEZ SEALER BN201 cures in 15 min. at ambient temperatures between layers, but post-curing at elevating temparetures is recommened (see PDS). It´ll provide a durable medio glossy surface. With BREEZ SEALER BN201, when used in combination with our waterbased release agents, such as “Watershield” or “Enviroshield”, you´ll get a completely solvent-free release system. This Sealer is developed especially to the aircraft- and windmill-industry, and can be applied quickly by using our Taski Spraymop system. (Saves process time)
BREEZ WATER SHIELD
WATER BASEDRelease agent
High release power
BREEZ WATER SHIELD is a versatile, odourless and NON VOC release agent designed specifically to meet the “Green Chemistry” requirements around the world. WATER SHIELD can be considered a UNIVERSAL release.
It is a high performance polymer coating created to give multiple releases while exceeding the most demanding environmental requirements. WATER SHIELD can be used in most moulding operations.
TIP: APPLICATION WITH TASKI SPRAYMOP.
Medio high release power
BREEZ ENVIROSHIELD is, like Water Shield, a versatile, odorless and NON VOC release agent. ENVIROSHIELD is recommended for applications requiring multiple releases, superior surface finish with high gloss and easy touch-up for seamless production cycles.
ENVIROSHIELD has a watercontents of 96-98%. ENVIROSHIELD is formulated for large moulds, and moulds where items are easy to demould
TIP: APPLICATION WITH TASKI SPRAYMOP.
BREEZ SILVERSHIELD 320
Low release power
– Improves tackiness from e.g. sealant tapes, !
BREEZ SILVERSHIELD 320 is an odourless 100% water-based, NON-VOC special release agent. SILVERSHIELD 320 is designed primarily for use as a semi-permanent sealer/release coating for parts that require good lay-up adhesion.
SILVERSHIELD 320 can also be applied directly on top of the Zyvax Water Shield & Enviroshield release agents to improve surface adhesion for low tack prepregs…
BREEZ NANO RELEASE
Description – specialty product:
Medio release power
– Unique polymer based on same chemical backbone as Sealer BN201. Very suitable for PU gelcoats, and in general prevents from running and fisheying. Suitable for both polyester and epoxy production.!
NANO RELEASE leaves a more “dry” surface than known from WaterShield and Enviroshield, but with same quick methods for application.
- Epoxy pre-preg
- Epoxy infusion
- Epoxy RTM
- Vinylester without gelcoat
Granudan is the exclusive supplier & consultant of the BreeZ release products Worldwide.
BreeZ products are based on a significant strong waterbased polymer suitable for all types of epoxy production environments with or without gelcoat such as blades, mandrells, webs, inner sections etc. The system is specified for Wind Turbine Blade Manufacturer and consists of a sealer and four different release agents with each specific level of release properties. Same application and fast curing in only 15 minutes for ALL BreeZ products – including the waterbased sealer!!! When using these products you will eliminate odour and reduce the need for masks, gloves and installing costly fume ventilations systems. The BreeZ range of products eliminates flammables and toxic chemicals from working areas, and ensures a healthy environment for your employees.
– NO ODOURS, NO VOC´s, NO HAPS.
Same application technique for both sealer and release agent using the wipe-on/wipe-off principal. Room temperature curing in just 15 minutter – such a quick curing for a waterbased sealer is quite unique and benchmarking for the Industry. Limit downtime and spent less time on mold maintenance, while improving the working environment for Operators. That´s a win-win most of our blade manufacturer have realized and supported for so many years.